Resultados 1 al 7 de 7

Tema: Pelando con FreeBSD

  1. #1 Pelando con FreeBSD 
    Colaborador HH
    Fecha de ingreso
    Jun 2006
    Ubicación
    Uruguay
    Mensajes
    1.450
    Descargas
    11
    Uploads
    0
    En estos días que se me terminan las vacaciones decidi volver a poner freebsd en una maquina, y dejarlo como sistema defacto.
    El asunto es que entre que habia sacado el freebsd y lo he vuelto a poner, habia cambiado la tarjeta de video.

    En aquel momento no tuve problemas con las X, pero despues de casi todo el día, ya me tiene podrido.

    No inician las X, cada vez que hago
    Xorg -configure
    X -config /root/xorg.conf.new

    me dice Out of range.
    Cuando modifico el archivo, que hasta ahora lo único que he agregado es Mode "1024x768"
    Sigue sin funcionar.
    Instale los driver de nvidia también.. para ver si por ahí se arreglaba.
    /usr/ports/x11/nvidia-drivers # make install clean
    y nada.
    Lo extraño es lo que he visto en los logs, los pego:

    Código:
    X Window System Version 6.9.0
    Release Date: 21 December 2005
    X Protocol Version 11, Revision 0, Release 6.9
    Build Operating System: FreeBSD 6.2 i386 [ELF] 
    Current Operating System: FreeBSD  6.2-RELEASE FreeBSD 6.2-RELEASE #0: Fri Jan 12 11:05:30 UTC 2007     root@dessler.cse.buffalo.edu:/usr/obj/usr/src/sys/SMP i386
    Build Date: 16 October 2006
    	Before reporting problems, check http://wiki.X.Org
    	to make sure that you have the latest version.
    Module Loader present
    Markers: (--) probed, (**) from config file, (==) default setting,
    	(++) from command line, (!!) notice, (II) informational,
    	(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
    (==) Log file: "/var/log/Xorg.0.log", Time: Thu Jul 31 15:35:20 2008
    (EE) Unable to locate/open config file
    (II) Module ABI versions:
    	X.Org ANSI C Emulation: 0.2
    	X.Org Video Driver: 0.8
    	X.Org XInput driver : 0.5
    	X.Org Server Extension : 0.2
    	X.Org Font Renderer : 0.4
    (II) Loader running on freebsd
    (II) LoadModule: "bitmap"
    (II) Loading /usr/X11R6/lib/modules/fonts/libbitmap.so
    (II) Module bitmap: vendor="X.Org Foundation"
    	compiled for 6.9.0, module version = 1.0.0
    	Module class: X.Org Font Renderer
    	ABI class: X.Org Font Renderer, version 0.4
    (II) Loading font Bitmap
    (II) LoadModule: "pcidata"
    (II) Loading /usr/X11R6/lib/modules/libpcidata.so
    (II) Module pcidata: vendor="X.Org Foundation"
    	compiled for 6.9.0, module version = 1.0.0
    	ABI class: X.Org Video Driver, version 0.8
    (--) Using syscons driver with X support (version 2.0)
    (--) using VT number 9
    
    (II) PCI: Probing config type using method 1
    (II) PCI: Config type is 1
    (II) PCI: stages = 0x03, oldVal1 = 0x00000000, mode1Res1 = 0x80000000
    (II) PCI: PCI scan (all values are in hex)
    (II) PCI: 00:00:0: chip 1039,0651 card 0000,0000 rev 02 class 06,00,00 hdr 80
    (II) PCI: 00:01:0: chip 1039,0001 card 0000,0000 rev 00 class 06,04,00 hdr 01
    (II) PCI: 00:02:0: chip 1039,0008 card 0000,0000 rev 25 class 06,01,00 hdr 80
    (II) PCI: 00:02:5: chip 1039,5513 card 1039,5513 rev 00 class 01,01,8a hdr 00
    (II) PCI: 00:02:7: chip 1039,7012 card 13f6,0300 rev a0 class 04,01,00 hdr 00
    (II) PCI: 00:03:0: chip 1039,7001 card 1039,7001 rev 0f class 0c,03,10 hdr 80
    (II) PCI: 00:03:1: chip 1039,7001 card 1039,7001 rev 0f class 0c,03,10 hdr 00
    (II) PCI: 00:03:2: chip 1039,7002 card 1039,7002 rev 00 class 0c,03,20 hdr 00
    (II) PCI: 00:04:0: chip 1039,0900 card 1039,0900 rev 90 class 02,00,00 hdr 00
    (II) PCI: 00:0c:0: chip 1013,4000 card 0000,0000 rev 01 class 07,80,00 hdr 00
    (II) PCI: 01:00:0: chip 10de,0322 card 1682,1280 rev a1 class 03,00,00 hdr 00
    (II) PCI: End of PCI scan
    (II) Host-to-PCI bridge:
    (II) Bus 0: bridge is at (0:0:0), (0,0,1), BCTRL: 0x0008 (VGA_EN is set)
    (II) Bus 0 I/O range:
    	[0] -1	0	0x00000000 - 0x0000ffff (0x10000) IX[B]
    (II) Bus 0 non-prefetchable memory range:
    	[0] -1	0	0x00000000 - 0xffffffff (0x0) MX[B]
    (II) Bus 0 prefetchable memory range:
    	[0] -1	0	0x00000000 - 0xffffffff (0x0) MX[B]
    (II) PCI-to-PCI bridge:
    (II) Bus 1: bridge is at (0:1:0), (0,1,2), BCTRL: 0x000a (VGA_EN is set)
    (II) Bus 1 non-prefetchable memory range:
    	[0] -1	0	0xddd00000 - 0xdfefffff (0x2200000) MX[B]
    (II) Bus 1 prefetchable memory range:
    	[0] -1	0	0xcda00000 - 0xddbfffff (0x10200000) MX[B]
    (II) PCI-to-ISA bridge:
    (II) Bus -1: bridge is at (0:2:0), (0,-1,-1), BCTRL: 0x0008 (VGA_EN is set)
    (--) PCI:*(1:0:0) nVidia Corporation NV34 [GeForce FX 5200] rev 161, Mem @ 0xde000000/24, 0xd0000000/27, BIOS @ 0xdfee0000/17
    xf86AutoConfig: Primary PCI is 1:0:0
    Running "/usr/X11R6/bin/getconfig -X 60900000 -I /etc/X11,/usr/X11R6/etc/X11,/usr/X11R6/lib/modules,/usr/X11R6/lib/X11/getconfig -v 0x10de -d 0x0322 -r 0xa1 -s 0x1682 -b 0x1280 -c 0x0300"
    New driver is "nv"
    (==) Using default built-in configuration (53 lines)
    (==) --- Start of built-in configuration ---
    	Section "Module"
    		Load	"extmod"
    		Load	"dbe"
    		Load	"glx"
    		Load	"freetype"
    	EndSection
    	Section "Monitor"
    		Identifier	"Builtin Default Monitor"
    		Option	"TargetRefresh"	"75.0"
    	EndSection
    	Section "Device"
    		Identifier	"Builtin Default nv Device 0"
    		Driver	"nv"
    	EndSection
    	Section "Screen"
    		Identifier	"Builtin Default nv Screen 0"
    		Device	"Builtin Default nv Device 0"
    		Monitor	"Builtin Default Monitor"
    	EndSection
    	Section "Device"
    		Identifier	"Builtin Default fbdev Device 0"
    		Driver	"fbdev"
    	EndSection
    	Section "Screen"
    		Identifier	"Builtin Default fbdev Screen 0"
    		Device	"Builtin Default fbdev Device 0"
    		Monitor	"Builtin Default Monitor"
    	EndSection
    	Section "Device"
    		Identifier	"Builtin Default vesa Device 0"
    		Driver	"vesa"
    	EndSection
    	Section "Screen"
    		Identifier	"Builtin Default vesa Screen 0"
    		Device	"Builtin Default vesa Device 0"
    		Monitor	"Builtin Default Monitor"
    	EndSection
    	Section "Device"
    		Identifier	"Builtin Default vga Device 0"
    		Driver	"vga"
    	EndSection
    	Section "Screen"
    		Identifier	"Builtin Default vga Screen 0"
    		Device	"Builtin Default vga Device 0"
    		Monitor	"Builtin Default Monitor"
    	EndSection
    	Section "ServerLayout"
    		Identifier	"Builtin Default Layout"
    		Screen	"Builtin Default nv Screen 0"
    		Screen	"Builtin Default fbdev Screen 0"
    		Screen	"Builtin Default vesa Screen 0"
    		Screen	"Builtin Default vga Screen 0"
    	EndSection
    (==) --- End of built-in configuration ---
    (==) ServerLayout "Builtin Default Layout"
    (**) |-->Screen "Builtin Default nv Screen 0" (0)
    (**) |   |-->Monitor "Builtin Default Monitor"
    (**) |   |-->Device "Builtin Default nv Device 0"
    (**) |-->Screen "Builtin Default fbdev Screen 0" (1)
    (**) |   |-->Monitor "Builtin Default Monitor"
    (**) |   |-->Device "Builtin Default fbdev Device 0"
    (**) |-->Screen "Builtin Default vesa Screen 0" (2)
    (**) |   |-->Monitor "Builtin Default Monitor"
    (**) |   |-->Device "Builtin Default vesa Device 0"
    (**) |-->Screen "Builtin Default vga Screen 0" (3)
    (**) |   |-->Monitor "Builtin Default Monitor"
    (**) |   |-->Device "Builtin Default vga Device 0"
    (==) |-->Input Device "<default pointer>"
    (==) |-->Input Device "<default keyboard>"
    (WW) The core pointer device wasn't specified explicitly in the layout.
    	Using the default mouse configuration.
    (WW) The core keyboard device wasn't specified explicitly in the layout.
    	Using the default keyboard configuration.
    (WW) No FontPath specified.  Using compiled-in default.
    (WW) The directory "/usr/X11R6/lib/X11/fonts/CID/" does not exist.
    	Entry deleted from font path.
    (==) FontPath set to "/usr/X11R6/lib/X11/fonts/misc/,/usr/X11R6/lib/X11/fonts/TTF/,/usr/X11R6/lib/X11/fonts/Type1/,/usr/X11R6/lib/X11/fonts/75dpi/,/usr/X11R6/lib/X11/fonts/100dpi/"
    (==) RgbPath set to "/usr/X11R6/lib/X11/rgb"
    (==) ModulePath set to "/usr/X11R6/lib/modules"
    (II) Addressable bus resource ranges are
    	[0] -1	0	0x00000000 - 0xffffffff (0x0) MX[B]
    	[1] -1	0	0x00000000 - 0x0000ffff (0x10000) IX[B]
    (II) OS-reported resource ranges:
    	[0] -1	0	0xffe00000 - 0xffffffff (0x200000) MX[B](B)
    	[1] -1	0	0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
    	[2] -1	0	0x000f0000 - 0x000fffff (0x10000) MX[B]
    	[3] -1	0	0x000c0000 - 0x000effff (0x30000) MX[B]
    	[4] -1	0	0x00000000 - 0x0009ffff (0xa0000) MX[B]
    	[5] -1	0	0x0000ffff - 0x0000ffff (0x1) IX[B]
    	[6] -1	0	0x00000000 - 0x000000ff (0x100) IX[B]
    (II) PCI Memory resource overlap reduced 0xe0000000 from 0xffffffff to 0xdfffffff
    (II) Active PCI resource ranges:
    	[0] -1	0	0xdfff7000 - 0xdfff7fff (0x1000) MX[B]E
    	[1] -1	0	0xdfffc000 - 0xdfffffff (0x4000) MX[B]E
    	[2] -1	0	0xdffff000 - 0xdfffffff (0x1000) MX[B]E
    	[3] -1	0	0xdfffe000 - 0xdfffffff (0x2000) MX[B]E
    	[4] -1	0	0xdfffd000 - 0xdfffdfff (0x1000) MX[B]E
    	[5] -1	0	0xe0000000 - 0xdfffffff (0x0) MX[B]EO
    	[6] -1	0	0xdfee0000 - 0xdfefffff (0x20000) MX[B](B)
    	[7] -1	0	0xd0000000 - 0xd7ffffff (0x8000000) MX[B](B)
    	[8] -1	0	0xde000000 - 0xdeffffff (0x1000000) MX[B](B)
    	[9] -1	0	0x0000d000 - 0x0000d0ff (0x100) IX[B]E
    	[10] -1	0	0x0000d400 - 0x0000d4ff (0x100) IX[B]E
    	[11] -1	0	0x0000d800 - 0x0000d8ff (0x100) IX[B]E
    	[12] -1	0	0x0000dc00 - 0x0000dcff (0x100) IX[B]E
    	[13] -1	0	0x0000ff00 - 0x0000ffff (0x100) IX[B]E
    (II) PCI Memory resource overlap reduced 0xdfffc000 from 0xdfffffff to 0xdfffcfff
    (II) PCI Memory resource overlap reduced 0xdfffe000 from 0xdfffffff to 0xdfffefff
    (II) Active PCI resource ranges after removing overlaps:
    	[0] -1	0	0xdfff7000 - 0xdfff7fff (0x1000) MX[B]E
    	[1] -1	0	0xdfffc000 - 0xdfffcfff (0x1000) MX[B]E
    	[2] -1	0	0xdffff000 - 0xdfffffff (0x1000) MX[B]E
    	[3] -1	0	0xdfffe000 - 0xdfffefff (0x1000) MX[B]E
    	[4] -1	0	0xdfffd000 - 0xdfffdfff (0x1000) MX[B]E
    	[5] -1	0	0xe0000000 - 0xdfffffff (0x0) MX[B]EO
    	[6] -1	0	0xdfee0000 - 0xdfefffff (0x20000) MX[B](B)
    	[7] -1	0	0xd0000000 - 0xd7ffffff (0x8000000) MX[B](B)
    	[8] -1	0	0xde000000 - 0xdeffffff (0x1000000) MX[B](B)
    	[9] -1	0	0x0000d000 - 0x0000d0ff (0x100) IX[B]E
    	[10] -1	0	0x0000d400 - 0x0000d4ff (0x100) IX[B]E
    	[11] -1	0	0x0000d800 - 0x0000d8ff (0x100) IX[B]E
    	[12] -1	0	0x0000dc00 - 0x0000dcff (0x100) IX[B]E
    	[13] -1	0	0x0000ff00 - 0x0000ffff (0x100) IX[B]E
    (II) OS-reported resource ranges after removing overlaps with PCI:
    	[0] -1	0	0xffe00000 - 0xffffffff (0x200000) MX[B](B)
    	[1] -1	0	0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
    	[2] -1	0	0x000f0000 - 0x000fffff (0x10000) MX[B]
    	[3] -1	0	0x000c0000 - 0x000effff (0x30000) MX[B]
    	[4] -1	0	0x00000000 - 0x0009ffff (0xa0000) MX[B]
    	[5] -1	0	0x0000ffff - 0x0000ffff (0x1) IX[B]
    	[6] -1	0	0x00000000 - 0x000000ff (0x100) IX[B]
    (II) All system resource ranges:
    	[0] -1	0	0xffe00000 - 0xffffffff (0x200000) MX[B](B)
    	[1] -1	0	0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
    	[2] -1	0	0x000f0000 - 0x000fffff (0x10000) MX[B]
    	[3] -1	0	0x000c0000 - 0x000effff (0x30000) MX[B]
    	[4] -1	0	0x00000000 - 0x0009ffff (0xa0000) MX[B]
    	[5] -1	0	0xdfff7000 - 0xdfff7fff (0x1000) MX[B]E
    	[6] -1	0	0xdfffc000 - 0xdfffcfff (0x1000) MX[B]E
    	[7] -1	0	0xdffff000 - 0xdfffffff (0x1000) MX[B]E
    	[8] -1	0	0xdfffe000 - 0xdfffefff (0x1000) MX[B]E
    	[9] -1	0	0xdfffd000 - 0xdfffdfff (0x1000) MX[B]E
    	[10] -1	0	0xe0000000 - 0xdfffffff (0x0) MX[B]EO
    	[11] -1	0	0xdfee0000 - 0xdfefffff (0x20000) MX[B](B)
    	[12] -1	0	0xd0000000 - 0xd7ffffff (0x8000000) MX[B](B)
    	[13] -1	0	0xde000000 - 0xdeffffff (0x1000000) MX[B](B)
    	[14] -1	0	0x0000ffff - 0x0000ffff (0x1) IX[B]
    	[15] -1	0	0x00000000 - 0x000000ff (0x100) IX[B]
    	[16] -1	0	0x0000d000 - 0x0000d0ff (0x100) IX[B]E
    	[17] -1	0	0x0000d400 - 0x0000d4ff (0x100) IX[B]E
    	[18] -1	0	0x0000d800 - 0x0000d8ff (0x100) IX[B]E
    	[19] -1	0	0x0000dc00 - 0x0000dcff (0x100) IX[B]E
    	[20] -1	0	0x0000ff00 - 0x0000ffff (0x100) IX[B]E
    (II) LoadModule: "extmod"
    (II) Loading /usr/X11R6/lib/modules/extensions/libextmod.so
    (II) Module extmod: vendor="X.Org Foundation"
    	compiled for 6.9.0, module version = 1.0.0
    	Module class: X.Org Server Extension
    	ABI class: X.Org Server Extension, version 0.2
    (II) Loading extension SHAPE
    (II) Loading extension MIT-SUNDRY-NONSTANDARD
    (II) Loading extension BIG-REQUESTS
    (II) Loading extension SYNC
    (II) Loading extension MIT-SCREEN-SAVER
    (II) Loading extension XC-MISC
    (II) Loading extension XFree86-VidModeExtension
    (II) Loading extension XFree86-Misc
    (II) Loading extension XFree86-DGA
    (II) Loading extension DPMS
    (II) Loading extension TOG-CUP
    (II) Loading extension Extended-Visual-Information
    (II) Loading extension XVideo
    (II) Loading extension XVideo-MotionCompensation
    (II) Loading extension X-Resource
    (II) LoadModule: "dbe"
    (II) Loading /usr/X11R6/lib/modules/extensions/libdbe.so
    (II) Module dbe: vendor="X.Org Foundation"
    	compiled for 6.9.0, module version = 1.0.0
    	Module class: X.Org Server Extension
    	ABI class: X.Org Server Extension, version 0.2
    (II) Loading extension DOUBLE-BUFFER
    (II) LoadModule: "glx"
    (II) Loading /usr/X11R6/lib/modules/extensions/libglx.so
    (II) Module glx: vendor="NVIDIA Corporation"
    	compiled for 4.0.2, module version = 1.0.8776
    	Module class: X.Org Server Extension
    	ABI class: X.Org Server Extension, version 0.1
    (II) Loading extension GLX
    (II) LoadModule: "freetype"
    (II) Loading /usr/X11R6/lib/modules/fonts/libfreetype.so
    (II) Module freetype: vendor="X.Org Foundation & the After X-TT Project"
    	compiled for 6.9.0, module version = 2.1.0
    	Module class: X.Org Font Renderer
    	ABI class: X.Org Font Renderer, version 0.4
    (II) Loading font FreeType
    (II) LoadModule: "nv"
    (II) Loading /usr/X11R6/lib/modules/drivers/nv_drv.so
    (II) Module nv: vendor="X.Org Foundation"
    	compiled for 6.9.0, module version = 1.0.1
    	Module class: X.Org Video Driver
    	ABI class: X.Org Video Driver, version 0.8
    (II) LoadModule: "fbdev"
    (WW) Warning, couldn't open module fbdev
    (II) UnloadModule: "fbdev"
    (EE) Failed to load module "fbdev" (module does not exist, 0)
    (II) LoadModule: "vesa"
    (II) Loading /usr/X11R6/lib/modules/drivers/vesa_drv.so
    (II) Module vesa: vendor="X.Org Foundation"
    	compiled for 6.9.0, module version = 1.0.1
    	Module class: X.Org Video Driver
    	ABI class: X.Org Video Driver, version 0.8
    (II) LoadModule: "vga"
    (II) Loading /usr/X11R6/lib/modules/drivers/vga_drv.so
    (II) Module vga: vendor="X.Org Foundation"
    	compiled for 6.9.0, module version = 4.0.0
    	Module class: X.Org Video Driver
    	ABI class: X.Org Video Driver, version 0.8
    (II) LoadModule: "mouse"
    (II) Loading /usr/X11R6/lib/modules/input/mouse_drv.so
    (II) Module mouse: vendor="X.Org Foundation"
    	compiled for 6.9.0, module version = 1.0.3
    	Module class: X.Org XInput Driver
    	ABI class: X.Org XInput driver, version 0.5
    (II) LoadModule: "kbd"
    (II) Loading /usr/X11R6/lib/modules/input/kbd_drv.so
    (II) Module kbd: vendor="X.Org Foundation"
    	compiled for 6.9.0, module version = 1.0.1
    	Module class: X.Org XInput Driver
    	ABI class: X.Org XInput driver, version 0.5
    (II) NV: driver for NVIDIA chipsets: RIVA 128, RIVA TNT, RIVA TNT2,
    	Unknown TNT2, Vanta, RIVA TNT2 Ultra, RIVA TNT2 Model 64,
    	Aladdin TNT2, GeForce 256, GeForce DDR, Quadro, GeForce2 MX/MX 400,
    	GeForce2 MX 100/200, GeForce2 Go, Quadro2 MXR/EX/Go,
    	GeForce2 Integrated GPU, GeForce2 GTS, GeForce2 Ti, GeForce2 Ultra,
    	Quadro2 Pro, GeForce4 MX 460, GeForce4 MX 440, GeForce4 MX 420,
    	GeForce4 MX 440-SE, GeForce4 440 Go, GeForce4 420 Go,
    	GeForce4 420 Go 32M, GeForce4 460 Go, Quadro4 550 XGL,
    	GeForce4 440 Go 64M, Quadro4 NVS, Quadro4 500 GoGL,
    	GeForce4 410 Go 16M, GeForce4 MX 440 with AGP8X,
    	GeForce4 MX 440SE with AGP8X, GeForce4 MX 420 with AGP8X,
    	GeForce4 MX 4000, GeForce4 448 Go, GeForce4 488 Go, Quadro4 580 XGL,
    	Quadro4 280 NVS, Quadro4 380 XGL, Quadro NVS 50 PCI, GeForce4 448 Go,
    	GeForce4 MX Integrated GPU, GeForce3, GeForce3 Ti 200,
    	GeForce3 Ti 500, Quadro DCC, GeForce4 Ti 4600, GeForce4 Ti 4400,
    	0x0252, GeForce4 Ti 4200, Quadro4 900 XGL, Quadro4 750 XGL,
    	Quadro4 700 XGL, GeForce4 Ti 4800, GeForce4 Ti 4200 with AGP8X,
    	GeForce4 Ti 4800 SE, GeForce4 4200 Go, Quadro4 700 GoGL,
    	Quadro4 980 XGL, Quadro4 780 XGL, GeForce FX 5800 Ultra,
    	GeForce FX 5800, Quadro FX 2000, Quadro FX 1000,
    	GeForce FX 5600 Ultra, GeForce FX 5600, 0x0313, GeForce FX 5600SE,
    	0x0316, 0x0317, GeForce FX Go5600, GeForce FX Go5650,
    	Quadro FX Go700, 0x031D, 0x031E, 0x031F, GeForce FX 5200,
    	GeForce FX 5200 Ultra, GeForce FX 5200, GeForce FX 5200SE,
    	GeForce FX Go5200, GeForce FX Go5250, GeForce FX 5500,
    	GeForce FX 5100, GeForce FX Go5200 32M/64M, 0x0329,
    	Quadro NVS 55/280 PCI, Quadro FX 500/600 PCI,
    	GeForce FX Go53xx Series, GeForce FX Go5100, 0x032F,
    	GeForce FX 5900 Ultra, GeForce FX 5900, GeForce FX 5900XT,
    	GeForce FX 5950 Ultra, Quadro FX 700, GeForce FX 5900ZT,
    	Quadro FX 3000, GeForce FX 5700 Ultra, GeForce FX 5700,
    	GeForce FX 5700LE, GeForce FX 5700VE, 0x0345, GeForce FX Go5700,
    	GeForce FX Go5700, 0x0349, 0x034B, Quadro FX Go1000, Quadro FX 1100,
    	0x034F, GeForce 6800 Ultra, GeForce 6800, GeForce 6800 LE, 0x0043,
    	GeForce 6800 GT, GeForce 6800 GT, GeForce 6800 XT, 0x0049,
    	Quadro FX 4000, 0x00C0, GeForce 6800, GeForce 6800 LE,
    	GeForce 6800 XT, GeForce Go 6800, GeForce Go 6800 Ultra,
    	Quadro FX Go1400, Quadro FX 3450/4000 SDI, Quadro FX 1400,
    	GeForce 6600 GT, GeForce 6600, GeForce 6600 LE, 0x0143,
    	GeForce Go 6600, GeForce 6610 XL, GeForce Go 6600 TE/6200 TE,
    	GeForce 6700 XL, GeForce Go 6600, GeForce Go 6600 GT, 0x014B, 0x014C,
    	0x014D, Quadro FX 540, GeForce 6200, GeForce 6500,
    	GeForce 6200 TurboCache(TM), GeForce 6200SE TurboCache(TM),
    	GeForce 6200 LE, GeForce Go 6200, Quadro NVS 285, GeForce Go 6400,
    	GeForce Go 6200, GeForce Go 6400, GeForce 6250, 0x016B, 0x016C,
    	0x016D, 0x016E, 0x0210, GeForce 6800, GeForce 6800 LE,
    	GeForce 6800 GT, 0x0220, GeForce 6200, 0x0222, 0x0228, 0x0090,
    	GeForce 7800 GTX, GeForce 7800 GT, 0x0093, 0x0094, GeForce Go 7800,
    	GeForce Go 7800 GTX, 0x009C, Quadro FX 4500, 0x009E
    (II) VESA: driver for VESA chipsets: vesa
    (II) VGA: Generic VGA driver (version 4.0) for chipsets: generic
    (II) Primary Device is: PCI 01:00:0
    (--) Assigning device section with no busID to primary device
    (--) Chipset GeForce FX 5200 found
    (II) resource ranges after xf86ClaimFixedResources() call:
    	[0] -1	0	0xffe00000 - 0xffffffff (0x200000) MX[B](B)
    	[1] -1	0	0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
    	[2] -1	0	0x000f0000 - 0x000fffff (0x10000) MX[B]
    	[3] -1	0	0x000c0000 - 0x000effff (0x30000) MX[B]
    	[4] -1	0	0x00000000 - 0x0009ffff (0xa0000) MX[B]
    	[5] -1	0	0xdfff7000 - 0xdfff7fff (0x1000) MX[B]E
    	[6] -1	0	0xdfffc000 - 0xdfffcfff (0x1000) MX[B]E
    	[7] -1	0	0xdffff000 - 0xdfffffff (0x1000) MX[B]E
    	[8] -1	0	0xdfffe000 - 0xdfffefff (0x1000) MX[B]E
    	[9] -1	0	0xdfffd000 - 0xdfffdfff (0x1000) MX[B]E
    	[10] -1	0	0xe0000000 - 0xdfffffff (0x0) MX[B]EO
    	[11] -1	0	0xdfee0000 - 0xdfefffff (0x20000) MX[B](B)
    	[12] -1	0	0xd0000000 - 0xd7ffffff (0x8000000) MX[B](B)
    	[13] -1	0	0xde000000 - 0xdeffffff (0x1000000) MX[B](B)
    	[14] -1	0	0x0000ffff - 0x0000ffff (0x1) IX[B]
    	[15] -1	0	0x00000000 - 0x000000ff (0x100) IX[B]
    	[16] -1	0	0x0000d000 - 0x0000d0ff (0x100) IX[B]E
    	[17] -1	0	0x0000d400 - 0x0000d4ff (0x100) IX[B]E
    	[18] -1	0	0x0000d800 - 0x0000d8ff (0x100) IX[B]E
    	[19] -1	0	0x0000dc00 - 0x0000dcff (0x100) IX[B]E
    	[20] -1	0	0x0000ff00 - 0x0000ffff (0x100) IX[B]E
    (--) Assigning device section with no busID to primary device
    (--) Chipset vesa found
    (--) Assigning device section with no busID to primary device
    (--) Chipset generic found
    (II) resource ranges after probing:
    	[0] -1	0	0xffe00000 - 0xffffffff (0x200000) MX[B](B)
    	[1] -1	0	0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
    	[2] -1	0	0x000f0000 - 0x000fffff (0x10000) MX[B]
    	[3] -1	0	0x000c0000 - 0x000effff (0x30000) MX[B]
    	[4] -1	0	0x00000000 - 0x0009ffff (0xa0000) MX[B]
    	[5] -1	0	0xdfff7000 - 0xdfff7fff (0x1000) MX[B]E
    	[6] -1	0	0xdfffc000 - 0xdfffcfff (0x1000) MX[B]E
    	[7] -1	0	0xdffff000 - 0xdfffffff (0x1000) MX[B]E
    	[8] -1	0	0xdfffe000 - 0xdfffefff (0x1000) MX[B]E
    	[9] -1	0	0xdfffd000 - 0xdfffdfff (0x1000) MX[B]E
    	[10] -1	0	0xe0000000 - 0xdfffffff (0x0) MX[B]EO
    	[11] -1	0	0xdfee0000 - 0xdfefffff (0x20000) MX[B](B)
    	[12] -1	0	0xd0000000 - 0xd7ffffff (0x8000000) MX[B](B)
    	[13] -1	0	0xde000000 - 0xdeffffff (0x1000000) MX[B](B)
    	[14] 0	0	0x000a0000 - 0x000affff (0x10000) MS[B]
    	[15] 0	0	0x000b0000 - 0x000b7fff (0x8000) MS[B]
    	[16] 0	0	0x000b8000 - 0x000bffff (0x8000) MS[B]
    	[17] -1	0	0x0000ffff - 0x0000ffff (0x1) IX[B]
    	[18] -1	0	0x00000000 - 0x000000ff (0x100) IX[B]
    	[19] -1	0	0x0000d000 - 0x0000d0ff (0x100) IX[B]E
    	[20] -1	0	0x0000d400 - 0x0000d4ff (0x100) IX[B]E
    	[21] -1	0	0x0000d800 - 0x0000d8ff (0x100) IX[B]E
    	[22] -1	0	0x0000dc00 - 0x0000dcff (0x100) IX[B]E
    	[23] -1	0	0x0000ff00 - 0x0000ffff (0x100) IX[B]E
    	[24] 0	0	0x000003b0 - 0x000003bb (0xc) IS[B]
    	[25] 0	0	0x000003c0 - 0x000003df (0x20) IS[B]
    (II) Setting vga for screen 0.
    (II) Loading sub module "int10"
    (II) LoadModule: "int10"
    (II) Loading /usr/X11R6/lib/modules/libint10.so
    (II) Module int10: vendor="X.Org Foundation"
    	compiled for 6.9.0, module version = 1.0.0
    	ABI class: X.Org Video Driver, version 0.8
    (II) NV(0): Initializing int10
    (==) NV(0): Write-combining range (0xa0000,0x20000) was already clear
    (==) NV(0): Write-combining range (0xc0000,0x40000) was already clear
    (II) NV(0): Primary V_BIOS segment is: 0xc000
    (==) NV(0): Write-combining range (0x0,0x1000) was already clear
    (--) NV(0): Chipset: "GeForce FX 5200"
    (II) NV(0): Creating default Display subsection in Screen section
    	"Builtin Default nv Screen 0" for depth/fbbpp 16/16
    (==) NV(0): Depth 16, (==) framebuffer bpp 16
    (==) NV(0): RGB weight 565
    (==) NV(0): Default visual is TrueColor
    (II) Loading sub module "vgahw"
    (II) LoadModule: "vgahw"
    (II) Loading /usr/X11R6/lib/modules/libvgahw.so
    (II) Module vgahw: vendor="X.Org Foundation"
    	compiled for 6.9.0, module version = 0.1.0
    	ABI class: X.Org Video Driver, version 0.8
    (==) NV(0): Using HW cursor
    (--) NV(0): Linear framebuffer at 0xD0000000
    (--) NV(0): MMIO registers at 0xDE000000
    (==) NV(0): Write-combining range (0xde000000,0x1000000) was already clear
    (II) Loading sub module "i2c"
    (II) LoadModule: "i2c"
    (II) Loading /usr/X11R6/lib/modules/libi2c.so
    (II) Module i2c: vendor="X.Org Foundation"
    	compiled for 6.9.0, module version = 1.2.0
    	ABI class: X.Org Video Driver, version 0.8
    (II) Loading sub module "ddc"
    (II) LoadModule: "ddc"
    (II) Loading /usr/X11R6/lib/modules/libddc.so
    (II) Module ddc: vendor="X.Org Foundation"
    	compiled for 6.9.0, module version = 1.0.0
    	ABI class: X.Org Video Driver, version 0.8
    (II) NV(0): I2C bus "DDC" initialized.
    (II) NV(0): Probing for analog device on output A...
    (--) NV(0):   ...found one
    (II) NV(0): Probing for analog device on output B...
    (--) NV(0):   ...can't find one
    (II) NV(0): Probing for EDID on I2C bus A...
    (II) NV(0): I2C device "DDC:ddc2" registered at address 0xA0.
    (II) NV(0): I2C device "DDC:ddc2" removed.
    (--) NV(0): DDC detected a CRT:
    (II) NV(0): Manufacturer: VSC  Model: 3319  Serial#: 16843009
    (II) NV(0): Year: 2005  Week: 1
    (II) NV(0): EDID Version: 1.3
    (II) NV(0): Analog Display Input,  Input Voltage Level: 0.700/0.300 V
    (II) NV(0): Sync:  Separate
    (II) NV(0): Max H-Image Size [cm]: horiz.: 30  vert.: 23
    (II) NV(0): Gamma: 2.20
    (II) NV(0): DPMS capabilities: Off; RGB/Color Display
    (II) NV(0): Default color space is primary color space
    (II) NV(0): First detailed timing is preferred mode
    (II) NV(0): redX: 0.631 redY: 0.347   greenX: 0.309 greenY: 0.583
    (II) NV(0): blueX: 0.150 blueY: 0.088   whiteX: 0.313 whiteY: 0.329
    (II) NV(0): Supported VESA Video Modes:
    (II) NV(0): 720x400@70Hz
    (II) NV(0): 640x480@60Hz
    (II) NV(0): 640x480@67Hz
    (II) NV(0): 640x480@72Hz
    (II) NV(0): 640x480@75Hz
    (II) NV(0): 800x600@56Hz
    (II) NV(0): 800x600@60Hz
    (II) NV(0): 800x600@72Hz
    (II) NV(0): 800x600@75Hz
    (II) NV(0): 832x624@75Hz
    (II) NV(0): 1024x768@60Hz
    (II) NV(0): 1024x768@70Hz
    (II) NV(0): 1024x768@75Hz
    (II) NV(0): Manufacturer's mask: 0
    (II) NV(0): Supported Future Video Modes:
    (II) NV(0): #0: hsize: 800  vsize 600  refresh: 85  vid: 22853
    (II) NV(0): #1: hsize: 640  vsize 480  refresh: 85  vid: 22833
    (II) NV(0): Supported additional Video Mode:
    (II) NV(0): clock: 65.0 MHz   Image Size:  304 x 228 mm
    (II) NV(0): h_active: 1024  h_sync: 1048  h_sync_end 1184 h_blank_end 1344 h_border: 0
    (II) NV(0): v_active: 768  v_sync: 771  v_sync_end 777 v_blanking: 806 v_border: 0
    (II) NV(0): Serial No: P1H050150246
    (II) NV(0): Ranges: V min: 50  V max: 85 Hz, H min: 30  H max: 62 kHz, PixClock max 80 MHz
    (II) NV(0): Monitor name: VE510b
    (II) NV(0): Probing for EDID on I2C bus B...
    (II) NV(0): I2C device "DDC:ddc2" registered at address 0xA0.
    (II) NV(0): I2C device "DDC:ddc2" removed.
    (II) NV(0):   ... none found
    (--) NV(0): CRTC 0 appears to have a CRT attached
    (II) NV(0): Using CRT on CRTC 0
    (--) NV(0): VideoRAM: 131072 kBytes
    (==) NV(0): Using gamma correction (1.0, 1.0, 1.0)
    (II) NV(0): Builtin Default Monitor: Using default hsync range of 30.00-62.00 kHz
    (II) NV(0): Builtin Default Monitor: Using default vrefresh range of 50.00-85.00 Hz
    (II) NV(0): Clock range:  12.00 to 350.00 MHz
    (II) NV(0): Not using default mode "1024x768" (vrefresh out of range)
    (II) NV(0): Not using default mode "512x384" (vrefresh out of range)
    (WW) (1024x768,Builtin Default Monitor) mode clock 94.5MHz exceeds DDC maximum 80MHz
    (II) NV(0): Not using default mode "1024x768" (hsync out of range)
    (II) NV(0): Not using default mode "512x384" (hsync out of range)
    (WW) (1152x864,Builtin Default Monitor) mode clock 108MHz exceeds DDC maximum 80MHz
    (II) NV(0): Not using default mode "1152x864" (hsync out of range)
    (II) NV(0): Not using default mode "576x432" (hsync out of range)
    (WW) (1280x960,Builtin Default Monitor) mode clock 108MHz exceeds DDC maximum 80MHz
    (WW) (1280x960,Builtin Default Monitor) mode clock 148.5MHz exceeds DDC maximum 80MHz
    (II) NV(0): Not using default mode "1280x960" (hsync out of range)
    (II) NV(0): Not using default mode "640x480" (hsync out of range)
    (WW) (1280x1024,Builtin Default Monitor) mode clock 108MHz exceeds DDC maximum 80MHz
    (II) NV(0): Not using default mode "1280x1024" (hsync out of range)
    (II) NV(0): Not using default mode "640x512" (hsync out of range)
    (WW) (1280x1024,Builtin Default Monitor) mode clock 135MHz exceeds DDC maximum 80MHz
    (II) NV(0): Not using default mode "1280x1024" (hsync out of range)
    (II) NV(0): Not using default mode "640x512" (hsync out of range)
    (WW) (1280x1024,Builtin Default Monitor) mode clock 157.5MHz exceeds DDC maximum 80MHz
    (II) NV(0): Not using default mode "1280x1024" (hsync out of range)
    (II) NV(0): Not using default mode "640x512" (hsync out of range)
    (WW) (1600x1200,Builtin Default Monitor) mode clock 162MHz exceeds DDC maximum 80MHz
    (II) NV(0): Not using default mode "1600x1200" (hsync out of range)
    (WW) (800x600,Builtin Default Monitor) mode clock 81MHz exceeds DDC maximum 80MHz
    (II) NV(0): Not using default mode "800x600" (hsync out of range)
    (WW) (1600x1200,Builtin Default Monitor) mode clock 175.5MHz exceeds DDC maximum 80MHz
    (II) NV(0): Not using default mode "1600x1200" (hsync out of range)
    (WW) (800x600,Builtin Default Monitor) mode clock 87.75MHz exceeds DDC maximum 80MHz
    (II) NV(0): Not using default mode "800x600" (hsync out of range)
    (WW) (1600x1200,Builtin Default Monitor) mode clock 189MHz exceeds DDC maximum 80MHz
    (II) NV(0): Not using default mode "1600x1200" (hsync out of range)
    (WW) (800x600,Builtin Default Monitor) mode clock 94.5MHz exceeds DDC maximum 80MHz
    (II) NV(0): Not using default mode "800x600" (hsync out of range)
    (WW) (1600x1200,Builtin Default Monitor) mode clock 202.5MHz exceeds DDC maximum 80MHz
    (II) NV(0): Not using default mode "1600x1200" (hsync out of range)
    (WW) (800x600,Builtin Default Monitor) mode clock 101.25MHz exceeds DDC maximum 80MHz
    (II) NV(0): Not using default mode "800x600" (hsync out of range)
    (WW) (1600x1200,Builtin Default Monitor) mode clock 229.5MHz exceeds DDC maximum 80MHz
    (II) NV(0): Not using default mode "1600x1200" (hsync out of range)
    (WW) (800x600,Builtin Default Monitor) mode clock 114.75MHz exceeds DDC maximum 80MHz
    (II) NV(0): Not using default mode "800x600" (hsync out of range)
    (WW) (1792x1344,Builtin Default Monitor) mode clock 204.8MHz exceeds DDC maximum 80MHz
    (II) NV(0): Not using default mode "1792x1344" (hsync out of range)
    (WW) (896x672,Builtin Default Monitor) mode clock 102.4MHz exceeds DDC maximum 80MHz
    (II) NV(0): Not using default mode "896x672" (hsync out of range)
    (WW) (1792x1344,Builtin Default Monitor) mode clock 261MHz exceeds DDC maximum 80MHz
    (II) NV(0): Not using default mode "1792x1344" (hsync out of range)
    (WW) (896x672,Builtin Default Monitor) mode clock 130.5MHz exceeds DDC maximum 80MHz
    (II) NV(0): Not using default mode "896x672" (hsync out of range)
    (WW) (1856x1392,Builtin Default Monitor) mode clock 218.3MHz exceeds DDC maximum 80MHz
    (II) NV(0): Not using default mode "1856x1392" (hsync out of range)
    (WW) (928x696,Builtin Default Monitor) mode clock 109.15MHz exceeds DDC maximum 80MHz
    (II) NV(0): Not using default mode "928x696" (hsync out of range)
    (WW) (1856x1392,Builtin Default Monitor) mode clock 288MHz exceeds DDC maximum 80MHz
    (II) NV(0): Not using default mode "1856x1392" (hsync out of range)
    (WW) (928x696,Builtin Default Monitor) mode clock 144MHz exceeds DDC maximum 80MHz
    (II) NV(0): Not using default mode "928x696" (hsync out of range)
    (WW) (1920x1440,Builtin Default Monitor) mode clock 234MHz exceeds DDC maximum 80MHz
    (II) NV(0): Not using default mode "1920x1440" (hsync out of range)
    (WW) (960x720,Builtin Default Monitor) mode clock 117MHz exceeds DDC maximum 80MHz
    (II) NV(0): Not using default mode "960x720" (hsync out of range)
    (WW) (1920x1440,Builtin Default Monitor) mode clock 297MHz exceeds DDC maximum 80MHz
    (II) NV(0): Not using default mode "1920x1440" (hsync out of range)
    (WW) (960x720,Builtin Default Monitor) mode clock 148.5MHz exceeds DDC maximum 80MHz
    (II) NV(0): Not using default mode "960x720" (hsync out of range)
    (WW) (1400x1050,Builtin Default Monitor) mode clock 122MHz exceeds DDC maximum 80MHz
    (II) NV(0): Not using default mode "1400x1050" (hsync out of range)
    (II) NV(0): Not using default mode "700x525" (hsync out of range)
    (WW) (1400x1050,Builtin Default Monitor) mode clock 155.8MHz exceeds DDC maximum 80MHz
    (II) NV(0): Not using default mode "1400x1050" (hsync out of range)
    (II) NV(0): Not using default mode "700x525" (hsync out of range)
    (WW) (1600x1024,Builtin Default Monitor) mode clock 106.91MHz exceeds DDC maximum 80MHz
    (II) NV(0): Not using default mode "1600x1024" (hsync out of range)
    (II) NV(0): Not using default mode "800x512" (hsync out of range)
    (WW) (1920x1440,Builtin Default Monitor) mode clock 341.35MHz exceeds DDC maximum 80MHz
    (II) NV(0): Not using default mode "1920x1440" (hsync out of range)
    (WW) (960x720,Builtin Default Monitor) mode clock 170.675MHz exceeds DDC maximum 80MHz
    (II) NV(0): Not using default mode "960x720" (hsync out of range)
    (WW) (2048x1536,Builtin Default Monitor) mode clock 266.95MHz exceeds DDC maximum 80MHz
    (II) NV(0): Not using default mode "2048x1536" (hsync out of range)
    (WW) (1024x768,Builtin Default Monitor) mode clock 133.475MHz exceeds DDC maximum 80MHz
    (II) NV(0): Not using default mode "1024x768" (hsync out of range)
    (WW) (2048x1536,Builtin Default Monitor) mode clock 340.48MHz exceeds DDC maximum 80MHz
    (II) NV(0): Not using default mode "2048x1536" (hsync out of range)
    (WW) (1024x768,Builtin Default Monitor) mode clock 170.24MHz exceeds DDC maximum 80MHz
    (II) NV(0): Not using default mode "1024x768" (hsync out of range)
    (II) NV(0): Not using default mode "2048x1536" (bad mode clock/interlace/doublescan)
    (WW) (1024x768,Builtin Default Monitor) mode clock 194.02MHz exceeds DDC maximum 80MHz
    (II) NV(0): Not using default mode "1024x768" (hsync out of range)
    (**) Option "TargetRefresh" "75.0"
    (**) NV(0): Target refresh rate is 75.0 Hz
    (--) NV(0): Virtual size is 1024x768 (pitch 1024)
    (**) NV(0): *Default mode "1024x768": 78.8 MHz, 60.1 kHz, 75.1 Hz
    (II) NV(0): Modeline "1024x768"   78.80  1024 1040 1136 1312  768 769 772 800 +hsync +vsync
    (**) NV(0): *Default mode "832x624": 57.3 MHz, 49.7 kHz, 74.6 Hz
    (II) NV(0): Modeline "832x624"   57.28  832 864 928 1152  624 625 628 667 -hsync -vsync
    (**) NV(0): *Default mode "800x600": 56.3 MHz, 53.7 kHz, 85.1 Hz
    (II) NV(0): Modeline "800x600"   56.30  800 832 896 1048  600 601 604 631 +hsync +vsync
    (**) NV(0): *Default mode "800x600": 49.5 MHz, 46.9 kHz, 75.0 Hz
    (II) NV(0): Modeline "800x600"   49.50  800 816 896 1056  600 601 604 625 +hsync +vsync
    (**) NV(0): *Default mode "640x480": 36.0 MHz, 43.3 kHz, 85.0 Hz
    (II) NV(0): Modeline "640x480"   36.00  640 696 752 832  480 481 484 509 -hsync -vsync
    (**) NV(0): *Default mode "640x480": 31.5 MHz, 37.5 kHz, 75.0 Hz
    (II) NV(0): Modeline "640x480"   31.50  640 656 720 840  480 481 484 500 -hsync -vsync
    (**) NV(0): *Default mode "720x400": 35.5 MHz, 37.9 kHz, 85.0 Hz
    (II) NV(0): Modeline "720x400"   35.50  720 756 828 936  400 401 404 446 -hsync +vsync
    (**) NV(0): *Default mode "640x400": 31.5 MHz, 37.9 kHz, 85.1 Hz
    (II) NV(0): Modeline "640x400"   31.50  640 672 736 832  400 401 404 445 -hsync +vsync
    (**) NV(0): *Default mode "640x350": 31.5 MHz, 37.9 kHz, 85.1 Hz
    (II) NV(0): Modeline "640x350"   31.50  640 672 736 832  350 382 385 445 +hsync -vsync
    (**) NV(0): *Default mode "512x384": 39.4 MHz, 60.1 kHz, 75.1 Hz (D)
    (II) NV(0): Modeline "512x384"   39.40  512 520 568 656  384 384 386 400 doublescan +hsync +vsync
    (**) NV(0): *Default mode "416x312": 28.6 MHz, 49.7 kHz, 74.7 Hz (D)
    (II) NV(0): Modeline "416x312"   28.64  416 432 464 576  312 312 314 333 doublescan -hsync -vsync
    (**) NV(0): *Default mode "400x300": 28.1 MHz, 53.7 kHz, 85.3 Hz (D)
    (II) NV(0): Modeline "400x300"   28.15  400 416 448 524  300 300 302 315 doublescan +hsync +vsync
    (**) NV(0): *Default mode "400x300": 24.8 MHz, 46.9 kHz, 75.1 Hz (D)
    (II) NV(0): Modeline "400x300"   24.75  400 408 448 528  300 300 302 312 doublescan +hsync +vsync
    (**) NV(0): *Default mode "320x240": 18.0 MHz, 43.3 kHz, 85.2 Hz (D)
    (II) NV(0): Modeline "320x240"   18.00  320 348 376 416  240 240 242 254 doublescan -hsync -vsync
    (**) NV(0): *Default mode "320x240": 15.8 MHz, 37.5 kHz, 75.0 Hz (D)
    (II) NV(0): Modeline "320x240"   15.75  320 328 360 420  240 240 242 250 doublescan -hsync -vsync
    (**) NV(0): *Default mode "360x200": 17.8 MHz, 37.9 kHz, 85.0 Hz (D)
    (II) NV(0): Modeline "360x200"   17.75  360 378 414 468  200 200 202 223 doublescan -hsync +vsync
    (**) NV(0): *Default mode "320x200": 15.8 MHz, 37.9 kHz, 85.3 Hz (D)
    (II) NV(0): Modeline "320x200"   15.75  320 336 368 416  200 200 202 222 doublescan -hsync +vsync
    (**) NV(0): *Default mode "320x175": 15.8 MHz, 37.9 kHz, 85.3 Hz (D)
    (II) NV(0): Modeline "320x175"   15.75  320 336 368 416  175 191 192 222 doublescan +hsync -vsync
    (--) NV(0): Display dimensions: (300, 230) mm
    (--) NV(0): DPI set to (86, 84)
    (II) Loading sub module "fb"
    (II) LoadModule: "fb"
    (II) Loading /usr/X11R6/lib/modules/libfb.so
    (II) Module fb: vendor="X.Org Foundation"
    	compiled for 6.9.0, module version = 1.0.0
    	ABI class: X.Org ANSI C Emulation, version 0.2
    (II) Loading sub module "xaa"
    (II) LoadModule: "xaa"
    (II) Loading /usr/X11R6/lib/modules/libxaa.so
    (II) Module xaa: vendor="X.Org Foundation"
    	compiled for 6.9.0, module version = 1.2.0
    	ABI class: X.Org Video Driver, version 0.8
    (II) Loading sub module "ramdac"
    (II) LoadModule: "ramdac"
    (II) Loading /usr/X11R6/lib/modules/libramdac.so
    (II) Module ramdac: vendor="X.Org Foundation"
    	compiled for 6.9.0, module version = 0.1.0
    	ABI class: X.Org Video Driver, version 0.8
    (==) NV(0): Write-combining range (0x0,0x1000) was already clear
    (II) UnloadModule: "vesa"
    (II) Unloading /usr/X11R6/lib/modules/drivers/vesa_drv.so
    (II) UnloadModule: "vga"
    (II) Unloading /usr/X11R6/lib/modules/drivers/vga_drv.so
    (II) do I need RAC?  No, I don't.
    (II) resource ranges after preInit:
    	[0] 0	0	0xd0000000 - 0xd7ffffff (0x8000000) MX[B]
    	[1] 0	0	0xde000000 - 0xdeffffff (0x1000000) MX[B]
    	[2] -1	0	0xffe00000 - 0xffffffff (0x200000) MX[B](B)
    	[3] -1	0	0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
    	[4] -1	0	0x000f0000 - 0x000fffff (0x10000) MX[B]
    	[5] -1	0	0x000c0000 - 0x000effff (0x30000) MX[B]
    	[6] -1	0	0x00000000 - 0x0009ffff (0xa0000) MX[B]
    	[7] -1	0	0xdfff7000 - 0xdfff7fff (0x1000) MX[B]E
    	[8] -1	0	0xdfffc000 - 0xdfffcfff (0x1000) MX[B]E
    	[9] -1	0	0xdffff000 - 0xdfffffff (0x1000) MX[B]E
    	[10] -1	0	0xdfffe000 - 0xdfffefff (0x1000) MX[B]E
    	[11] -1	0	0xdfffd000 - 0xdfffdfff (0x1000) MX[B]E
    	[12] -1	0	0xe0000000 - 0xdfffffff (0x0) MX[B]EO
    	[13] -1	0	0xdfee0000 - 0xdfefffff (0x20000) MX[B](B)
    	[14] -1	0	0xd0000000 - 0xd7ffffff (0x8000000) MX[B](B)
    	[15] -1	0	0xde000000 - 0xdeffffff (0x1000000) MX[B](B)
    	[16] 0	0	0x000a0000 - 0x000affff (0x10000) MS[B](OprD)
    	[17] 0	0	0x000b0000 - 0x000b7fff (0x8000) MS[B](OprD)
    	[18] 0	0	0x000b8000 - 0x000bffff (0x8000) MS[B](OprD)
    	[19] -1	0	0x0000ffff - 0x0000ffff (0x1) IX[B]
    	[20] -1	0	0x00000000 - 0x000000ff (0x100) IX[B]
    	[21] -1	0	0x0000d000 - 0x0000d0ff (0x100) IX[B]E
    	[22] -1	0	0x0000d400 - 0x0000d4ff (0x100) IX[B]E
    	[23] -1	0	0x0000d800 - 0x0000d8ff (0x100) IX[B]E
    	[24] -1	0	0x0000dc00 - 0x0000dcff (0x100) IX[B]E
    	[25] -1	0	0x0000ff00 - 0x0000ffff (0x100) IX[B]E
    	[26] 0	0	0x000003b0 - 0x000003bb (0xc) IS[B](OprU)
    	[27] 0	0	0x000003c0 - 0x000003df (0x20) IS[B](OprU)
    (==) NV(0): Write-combining range (0xd0000000,0x8000000) was already set
    (==) NV(0): Write-combining range (0xa0000,0x10000) was already clear
    (II) NV(0): Using XFree86 Acceleration Architecture (XAA)
    	Screen to screen bit blits
    	Solid filled rectangles
    	8x8 mono pattern filled rectangles
    	Indirect CPU to Screen color expansion
    	Solid Lines
    	Scanline Image Writes
    	Offscreen Pixmaps
    	Setting up tile and stipple cache:
    		32 128x128 slots
    		32 256x256 slots
    		16 512x512 slots
    (==) NV(0): Backing store disabled
    (==) NV(0): Silken mouse enabled
    (==) RandR enabled
    (II) Initializing built-in extension MIT-SHM
    (II) Initializing built-in extension XInputExtension
    (II) Initializing built-in extension XTEST
    (II) Initializing built-in extension XKEYBOARD
    (II) Initializing built-in extension XC-APPGROUP
    (II) Initializing built-in extension SECURITY
    (II) Initializing built-in extension XINERAMA
    (II) Initializing built-in extension XFIXES
    (II) Initializing built-in extension XFree86-Bigfont
    (II) Initializing built-in extension RENDER
    (II) Initializing built-in extension RANDR
    (II) Initializing built-in extension COMPOSITE
    (II) Initializing built-in extension DAMAGE
    (II) Initializing built-in extension XEVIE
    (EE) Failed to initialize GLX extension (Compatible NVIDIA X driver not found)
    (WW) <default pointer>: No Device specified, looking for one...
    (EE) <default pointer>: Cannot find which device to use.
    (==) <default pointer>: Protocol: "Auto"
    (**) Option "CorePointer"
    (**) <default pointer>: Core Pointer
    (EE) xf86OpenSerial: No Device specified.
    (EE) <default pointer>: cannot open input device
    (EE) PreInit failed for input device "<default pointer>"
    (II) UnloadModule: "mouse"
    (**) Option "CoreKeyboard"
    (**) <default keyboard>: Core Keyboard
    (**) Option "Protocol" "standard"
    (**) <default keyboard>: Protocol: standard
    (**) Option "AutoRepeat" "500 30"
    (**) Option "XkbRules" "xorg"
    (**) <default keyboard>: XkbRules: "xorg"
    (**) Option "XkbModel" "pc105"
    (**) <default keyboard>: XkbModel: "pc105"
    (**) Option "XkbLayout" "us"
    (**) <default keyboard>: XkbLayout: "us"
    (**) Option "CustomKeycodes" "off"
    (**) <default keyboard>: CustomKeycodes disabled
    (WW) No core pointer registered
    (II) XINPUT: Adding extended input device "<default keyboard>" (type: KEYBOARD)
    No core pointer
    
    Fatal server error:
    failed to initialize core devices
    
    Please consult the The X.Org Foundation support 
    	 at http://wiki.X.Org
     for help. 
    Please also check the log file at "/var/log/Xorg.0.log" for additional information.
    he visto por ahí que dice en varios lugares

    " /usr/X11R6/ "

    Creo que se refiere a XFree86, pero yo no tengo ese servidor instalado. tengo Xorg.

    Otra cosa que hice, fue copiar el Xorg de mi otra maquina de GNU/Linux, es decir, copie y pege el /etc/X11/xorg.conf para ver si pasaba algo.. y sigue dando los mismos errores.

    pego el contenido de xorg.conf
    Código:
    # nvidia-xconfig: X configuration file generated by nvidia-xconfig
    # nvidia-xconfig:  version 1.0  (buildmeister@builder3)  Thu Nov  9 17:55:20 PST 2006
    
    # /etc/X11/xorg.conf (xorg X Window System server configuration file)
    #
    # This file was generated by dexconf, the Debian X Configuration tool, using
    # values from the debconf database.
    #
    # Edit this file with caution, and see the xorg.conf(5) manual page.
    # (Type "man xorg.conf" at the shell prompt.)
    #
    # This file is automatically updated on xserver-xorg package upgrades *only*
    # if it has not been modified since the last upgrade of the xserver-xorg
    # package.
    #
    # If you have edited this file but would like it to be automatically updated
    # again, run the following command:
    #   sudo dpkg-reconfigure -phigh xserver-xorg
    
    Section "ServerLayout"
        Identifier     "Default Layout"
        Screen         "Default Screen" 0 0
        InputDevice    "Generic Keyboard"
        InputDevice    "Configured Mouse"
        InputDevice    "stylus" "SendCoreEvents"
        InputDevice    "cursor" "SendCoreEvents"
        InputDevice    "eraser" "SendCoreEvents"
    EndSection
    
    Section "Files"
    
    	# path to defoma fonts
        FontPath        "/usr/share/fonts/X11/misc"
        FontPath        "/usr/share/fonts/X11/cyrillic"
        FontPath        "/usr/share/fonts/X11/100dpi/:unscaled"
        FontPath        "/usr/share/fonts/X11/75dpi/:unscaled"
        FontPath        "/usr/share/fonts/X11/Type1"
        FontPath        "/usr/share/fonts/X11/100dpi"
        FontPath        "/usr/share/fonts/X11/75dpi"
        FontPath        "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType"
    EndSection
    
    Section "Module"
        Load           "i2c"
        Load           "bitmap"
        Load           "ddc"
        Load           "extmod"
        Load           "freetype"
        Load           "glx"
        Load           "int10"
        Load           "vbe"
    EndSection
    
    Section "InputDevice"
        Identifier     "Generic Keyboard"
        Driver         "kbd"
        Option         "CoreKeyboard"
        Option         "XkbRules" "xorg"
        Option         "XkbModel" "pc105"
        Option         "XkbLayout" "latam"
        Option         "XkbVariant" "nodeadkeys"
    EndSection
    
    Section "InputDevice"
        Identifier     "Configured Mouse"
        Driver         "mouse"
        Option         "CorePointer"
        Option         "Device" "/dev/input/mice"
        Option         "Protocol" "ImPS/2"
        Option         "ZAxisMapping" "4 5"
        Option         "Emulate3Buttons" "true"
    EndSection
    
    Section "InputDevice"
        Identifier     "stylus"
        Driver         "wacom"
        Option         "Device" "/dev/input/wacom"
        Option         "Type" "stylus"
        Option         "ForceDevice" "ISDV4"		# Tablet PC ONLY
    EndSection
    
    Section "InputDevice"
        Identifier     "eraser"
        Driver         "wacom"
        Option         "Device" "/dev/input/wacom"
        Option         "Type" "eraser"
        Option         "ForceDevice" "ISDV4"		# Tablet PC ONLY
    EndSection
    
    Section "InputDevice"
        Identifier     "cursor"
        Driver         "wacom"
        Option         "Device" "/dev/input/wacom"
        Option         "Type" "cursor"
        Option         "ForceDevice" "ISDV4"		# Tablet PC ONLY
    EndSection
    
    Section "Monitor"
        Identifier     "Generic Monitor"
        HorizSync       28.0 - 51.0
        VertRefresh     43.0 - 60.0
        Option         "DPMS"
    EndSection
    
    Section "Device"
        Identifier     "nVidia Corporation NV11DDR [GeForce2 MX200]"
        Driver         "nvidia"
    EndSection
    
    Section "Screen"
        Identifier     "Default Screen"
        Device         "nVidia Corporation NV11DDR [GeForce2 MX200]"
        Monitor        "Generic Monitor"
        DefaultDepth    24
        Option         "TripleBuffer" "True"
        Option         "AllowGLXWithComposite" "True"
        Option         "RenderAccel" "True"
        Option         "AddARGBGLXVisuals" "True"
        SubSection     "Display"
            Depth       1
            Modes      "1024x768" "800x600" "640x480"
        EndSubSection
        SubSection     "Display"
            Depth       4
            Modes      "1024x768" "800x600" "640x480"
        EndSubSection
        SubSection     "Display"
            Depth       8
            Modes      "1024x768" "800x600" "640x480"
        EndSubSection
        SubSection     "Display"
            Depth       15
            Modes      "1024x768" "800x600" "640x480"
        EndSubSection
        SubSection     "Display"
            Depth       16
            Modes      "1024x768" "800x600" "640x480"
        EndSubSection
        SubSection     "Display"
            Depth       24
            Modes      "1024x768" "800x600" "640x480"
        EndSubSection
    EndSection
    
    Section "Extensions"
        Option         "Composite" "Enable"
    EndSection
    y por último pego el log de xdm.. no sé si sirve de algo:

    Código:
    xdm info (pid 28487): Couldn't connect to PRNGD socket "/tmp/entropy": No such file or directory
    
    X Window System Version 6.9.0
    Release Date: 21 December 2005
    X Protocol Version 11, Revision 0, Release 6.9
    Build Operating System: FreeBSD 6.2 i386 [ELF] 
    Current Operating System: FreeBSD  6.2-RELEASE FreeBSD 6.2-RELEASE #0: Fri Jan 12 11:05:30 UTC 2007     root@dessler.cse.buffalo.edu:/usr/obj/usr/src/sys/SMP i386
    Build Date: 16 October 2006
    	Before reporting problems, check http://wiki.X.Org
    	to make sure that you have the latest version.
    Module Loader present
    Markers: (--) probed, (**) from config file, (==) default setting,
    	(++) from command line, (!!) notice, (II) informational,
    	(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
    (==) Log file: "/var/log/Xorg.0.log", Time: Thu Jul 31 15:31:36 2008
    (==) Using config file: "/etc/X11/xorg.conf"
    (EE) Configured Mouse: Protocol "ImPS/2" is not supported on this platform
    (EE) PreInit failed for input device "Configured Mouse"
    The XKEYBOARD keymap compiler (xkbcomp) reports:
    > Warning:          Type "ONE_LEVEL" has 1 levels, but <RALT> has 2 symbols
    >                   Ignoring extra symbols
    Errors from xkbcomp are not fatal to the X server
    (EE) xf86OpenSerial: Cannot open device /dev/input/wacom
    	No such file or directory.
    Error opening /dev/input/wacom : No such file or directory
    (EE) xf86OpenSerial: Cannot open device /dev/input/wacom
    	No such file or directory.
    Error opening /dev/input/wacom : No such file or directory
    (EE) xf86OpenSerial: Cannot open device /dev/input/wacom
    	No such file or directory.
    Error opening /dev/input/wacom : No such file or directory
    (EE) xf86OpenSerial: Cannot open device /dev/input/wacom
    	No such file or directory.
    Error opening /dev/input/wacom : No such file or directory
    (EE) xf86OpenSerial: Cannot open device /dev/input/wacom
    	No such file or directory.
    Error opening /dev/input/wacom : No such file or directory
    (EE) xf86OpenSerial: Cannot open device /dev/input/wacom
    	No such file or directory.
    Error opening /dev/input/wacom : No such file or directory
    No core pointer
    
    Fatal server error:
    failed to initialize core devices
    
    Please consult the The X.Org Foundation support 
    	 at http://wiki.X.Org
     for help. 
    Please also check the log file at "/var/log/Xorg.0.log" for additional information.
    
    xdm error (pid 28491): IO Error in XOpenDisplay
    xdm error (pid 28487): Display :0 cannot be opened
    
    X Window System Version 6.9.0
    Release Date: 21 December 2005
    X Protocol Version 11, Revision 0, Release 6.9
    Build Operating System: FreeBSD 6.2 i386 [ELF] 
    Current Operating System: FreeBSD  6.2-RELEASE FreeBSD 6.2-RELEASE #0: Fri Jan 12 11:05:30 UTC 2007     root@dessler.cse.buffalo.edu:/usr/obj/usr/src/sys/SMP i386
    Build Date: 16 October 2006
    	Before reporting problems, check http://wiki.X.Org
    	to make sure that you have the latest version.
    Module Loader present
    Markers: (--) probed, (**) from config file, (==) default setting,
    	(++) from command line, (!!) notice, (II) informational,
    	(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
    (==) Log file: "/var/log/Xorg.0.log", Time: Thu Jul 31 15:31:38 2008
    (==) Using config file: "/etc/X11/xorg.conf"
    (EE) Configured Mouse: Protocol "ImPS/2" is not supported on this platform
    (EE) PreInit failed for input device "Configured Mouse"
    The XKEYBOARD keymap compiler (xkbcomp) reports:
    > Warning:          Type "ONE_LEVEL" has 1 levels, but <RALT> has 2 symbols
    >                   Ignoring extra symbols
    Errors from xkbcomp are not fatal to the X server
    (EE) xf86OpenSerial: Cannot open device /dev/input/wacom
    	No such file or directory.
    Error opening /dev/input/wacom : No such file or directory
    (EE) xf86OpenSerial: Cannot open device /dev/input/wacom
    	No such file or directory.
    Error opening /dev/input/wacom : No such file or directory
    (EE) xf86OpenSerial: Cannot open device /dev/input/wacom
    	No such file or directory.
    Error opening /dev/input/wacom : No such file or directory
    (EE) xf86OpenSerial: Cannot open device /dev/input/wacom
    	No such file or directory.
    Error opening /dev/input/wacom : No such file or directory
    (EE) xf86OpenSerial: Cannot open device /dev/input/wacom
    	No such file or directory.
    Error opening /dev/input/wacom : No such file or directory
    (EE) xf86OpenSerial: Cannot open device /dev/input/wacom
    	No such file or directory.
    Error opening /dev/input/wacom : No such file or directory
    No core pointer
    
    Fatal server error:
    failed to initialize core devices
    
    Please consult the The X.Org Foundation support 
    	 at http://wiki.X.Org
     for help. 
    Please also check the log file at "/var/log/Xorg.0.log" for additional information.
    
    xdm error (pid 28495): IO Error in XOpenDisplay
    xdm error (pid 28487): Display :0 cannot be opened
    
    X Window System Version 6.9.0
    Release Date: 21 December 2005
    X Protocol Version 11, Revision 0, Release 6.9
    Build Operating System: FreeBSD 6.2 i386 [ELF] 
    Current Operating System: FreeBSD  6.2-RELEASE FreeBSD 6.2-RELEASE #0: Fri Jan 12 11:05:30 UTC 2007     root@dessler.cse.buffalo.edu:/usr/obj/usr/src/sys/SMP i386
    Build Date: 16 October 2006
    	Before reporting problems, check http://wiki.X.Org
    	to make sure that you have the latest version.
    Module Loader present
    Markers: (--) probed, (**) from config file, (==) default setting,
    	(++) from command line, (!!) notice, (II) informational,
    	(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
    (==) Log file: "/var/log/Xorg.0.log", Time: Thu Jul 31 15:31:39 2008
    (==) Using config file: "/etc/X11/xorg.conf"
    (EE) Configured Mouse: Protocol "ImPS/2" is not supported on this platform
    (EE) PreInit failed for input device "Configured Mouse"
    The XKEYBOARD keymap compiler (xkbcomp) reports:
    > Warning:          Type "ONE_LEVEL" has 1 levels, but <RALT> has 2 symbols
    >                   Ignoring extra symbols
    Errors from xkbcomp are not fatal to the X server
    (EE) xf86OpenSerial: Cannot open device /dev/input/wacom
    	No such file or directory.
    Error opening /dev/input/wacom : No such file or directory
    (EE) xf86OpenSerial: Cannot open device /dev/input/wacom
    	No such file or directory.
    Error opening /dev/input/wacom : No such file or directory
    (EE) xf86OpenSerial: Cannot open device /dev/input/wacom
    	No such file or directory.
    Error opening /dev/input/wacom : No such file or directory
    (EE) xf86OpenSerial: Cannot open device /dev/input/wacom
    	No such file or directory.
    Error opening /dev/input/wacom : No such file or directory
    (EE) xf86OpenSerial: Cannot open device /dev/input/wacom
    	No such file or directory.
    Error opening /dev/input/wacom : No such file or directory
    (EE) xf86OpenSerial: Cannot open device /dev/input/wacom
    	No such file or directory.
    Error opening /dev/input/wacom : No such file or directory
    No core pointer
    
    Fatal server error:
    failed to initialize core devices
    
    Please consult the The X.Org Foundation support 
    	 at http://wiki.X.Org
     for help. 
    Please also check the log file at "/var/log/Xorg.0.log" for additional information.
    
    xdm error (pid 28499): IO Error in XOpenDisplay
    xdm error (pid 28487): Display :0 cannot be opened
    
    X Window System Version 6.9.0
    Release Date: 21 December 2005
    X Protocol Version 11, Revision 0, Release 6.9
    Build Operating System: FreeBSD 6.2 i386 [ELF] 
    Current Operating System: FreeBSD  6.2-RELEASE FreeBSD 6.2-RELEASE #0: Fri Jan 12 11:05:30 UTC 2007     root@dessler.cse.buffalo.edu:/usr/obj/usr/src/sys/SMP i386
    Build Date: 16 October 2006
    	Before reporting problems, check http://wiki.X.Org
    	to make sure that you have the latest version.
    Module Loader present
    Markers: (--) probed, (**) from config file, (==) default setting,
    	(++) from command line, (!!) notice, (II) informational,
    	(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
    (==) Log file: "/var/log/Xorg.0.log", Time: Thu Jul 31 15:31:41 2008
    (==) Using config file: "/etc/X11/xorg.conf"
    (EE) Configured Mouse: Protocol "ImPS/2" is not supported on this platform
    (EE) PreInit failed for input device "Configured Mouse"
    The XKEYBOARD keymap compiler (xkbcomp) reports:
    > Warning:          Type "ONE_LEVEL" has 1 levels, but <RALT> has 2 symbols
    >                   Ignoring extra symbols
    Errors from xkbcomp are not fatal to the X server
    (EE) xf86OpenSerial: Cannot open device /dev/input/wacom
    	No such file or directory.
    Error opening /dev/input/wacom : No such file or directory
    (EE) xf86OpenSerial: Cannot open device /dev/input/wacom
    	No such file or directory.
    Error opening /dev/input/wacom : No such file or directory
    (EE) xf86OpenSerial: Cannot open device /dev/input/wacom
    	No such file or directory.
    Error opening /dev/input/wacom : No such file or directory
    (EE) xf86OpenSerial: Cannot open device /dev/input/wacom
    	No such file or directory.
    Error opening /dev/input/wacom : No such file or directory
    (EE) xf86OpenSerial: Cannot open device /dev/input/wacom
    	No such file or directory.
    Error opening /dev/input/wacom : No such file or directory
    (EE) xf86OpenSerial: Cannot open device /dev/input/wacom
    	No such file or directory.
    Error opening /dev/input/wacom : No such file or directory
    No core pointer
    
    Fatal server error:
    failed to initialize core devices
    
    Please consult the The X.Org Foundation support 
    	 at http://wiki.X.Org
     for help. 
    Please also check the log file at "/var/log/Xorg.0.log" for additional information.
    
    xdm error (pid 28503): xdm error (pid 28487): Server for display :0 terminated unexpectedly: 1
    xdm error (pid 28487): Display :0 is being disabled
    Es decir, yo creo que el error está en que la maquina piensa que tengo XFree86 y tengo Xorg.

    pero no sé bien como arreglar esto.. las soluciones que se encuentran para rreglar las X no dan problemas con esto

    Ayuda ?

    Saludos,
    Cypress
    Louis Armstrong le dice a Ella Fitzgerald
    "take another drink of wine, and maybe you change your mind"
    Citar  
     

  2. #2  
    Moderador Global
    Fecha de ingreso
    Aug 2005
    Mensajes
    6.279
    Descargas
    7
    Uploads
    0
    Te había puesto otra respuesta, pero mejor échale un ojo a esto:
    http://ricondefreebsd.blogspot.com/2...reebsd-62.html

    Salu2


    Keep on Rollin'
    Última edición por j8k6f4v9j; 01-08-2008 a las 01:42

    . . . . . . . . . . . . . . . . . . . .
    [[ NORMAS DEL FORO ]]
    . . . . . . . . . . . . . . . . . . . .
    __________
    Citar  
     

  3. #3  
    Colaborador HH
    Fecha de ingreso
    Jun 2006
    Ubicación
    Uruguay
    Mensajes
    1.450
    Descargas
    11
    Uploads
    0
    Bien.. pues yo estoy bastante peor que el hombre del blog.
    Yo no tenia esos ports,bueno los consegui. segui sus consejos, edite el /boot/loader.conf

    le agregue el agp_load="YES" y charán..ahora no carga el kernel.
    solo sale el loader promt.

    Y no sé editar /boot/loader.conf desde ahí.
    entonces desde el cd freebsd, se crea una especie de LiveCD donde supuestamente podria arreglar mi problema

    estoy queriendo montar ahora / en esta shell que tengo.
    pero no esoty podiendo

    mount -t ufs /dev/ad1 /media/freebsd

    y me dice operacion de bloque no permitida.
    lo probe con ad0 ad1 ad1s1 ad1s1 ad1s1a etc y nada.. no puedo..

    cuando hago eso con ad1 o ad0 me da incorrect super block.

    googleando no encuentro nada.. :@

    Pista ?
    Louis Armstrong le dice a Ella Fitzgerald
    "take another drink of wine, and maybe you change your mind"
    Citar  
     

  4. #4  
    Moderador Global
    Fecha de ingreso
    Aug 2005
    Mensajes
    6.279
    Descargas
    7
    Uploads
    0
    Mira con dmesg cuál es el disco duro

    Si no puedes montar el disco (y luego hacer chroot y editar lo que quieras ) ya vemos otra opción.

    Salu2


    Keep on Rollin'

    . . . . . . . . . . . . . . . . . . . .
    [[ NORMAS DEL FORO ]]
    . . . . . . . . . . . . . . . . . . . .
    __________
    Citar  
     

  5. #5  
    Colaborador HH
    Fecha de ingreso
    Jun 2006
    Ubicación
    Uruguay
    Mensajes
    1.450
    Descargas
    11
    Uploads
    0
    pues pude montar /dev/ad1s1e..f

    Pero el ad1s1a donde está / no la quiere montar.
    hice un bsdlabel /dev/ad1s1
    y efectivamente tiene el mismo sistema de ficheros 4.2BSD que el del los otros que pude montar.
    entonces no entiendo porque no me deja montar el primero.


    buscando un poco no estoy seguro si esto es solo de linux, pero hice

    mount -t ufs -o ufstype=42bsd /dev/ad1s1a /media/fs4

    pero me dice que ufstype= no soportadoa

    dazed and confused
    Louis Armstrong le dice a Ella Fitzgerald
    "take another drink of wine, and maybe you change your mind"
    Citar  
     

  6. #6  
    Moderador Global
    Fecha de ingreso
    Aug 2005
    Mensajes
    6.279
    Descargas
    7
    Uploads
    0
    Lo propio es montar el sistema de archivos raíz desde otro FreeBSD, desde GNU/linux no estoy seguro de que esté soportada la escritura.

    A ver si esto te ayuda:
    http://www.freebsd.org/doc/es_ES.ISO...ot-blocks.html

    Salu2


    Keep on Rollin'

    . . . . . . . . . . . . . . . . . . . .
    [[ NORMAS DEL FORO ]]
    . . . . . . . . . . . . . . . . . . . .
    __________
    Citar  
     

  7. #7  
    Colaborador HH
    Fecha de ingreso
    Jun 2006
    Ubicación
    Uruguay
    Mensajes
    1.450
    Descargas
    11
    Uploads
    0
    bien, acabo de reparar el sector de arranque, y estoy en la misma maquina pero desde windows,

    buscando un programa para escribir ufs.

    pero no hay, solo encuentro de lectura, creo que lo único que me queda es bajarme el liveCD de freebsd, y arreglar todo desde ahí. :-/

    ya les cuento como me va.

    Salutt
    Louis Armstrong le dice a Ella Fitzgerald
    "take another drink of wine, and maybe you change your mind"
    Citar  
     

Temas similares

  1. Publicado FreeBSD 9.0
    Por Cypress en el foro LINUX - MAC - OTROS
    Respuestas: 1
    Último mensaje: 17-01-2012, 18:35
  2. Exploit para el SO FreeBSD 4.4?
    Por Anduriell en el foro VULNERABILIDADES
    Respuestas: 2
    Último mensaje: 16-02-2006, 22:55
  3. FreeBSD Md5
    Por dares6 en el foro INGENIERIA INVERSA
    Respuestas: 0
    Último mensaje: 03-07-2004, 13:40
  4. Documentacion de FreeBSD por favor!!
    Por nerviux en el foro LINUX - MAC - OTROS
    Respuestas: 0
    Último mensaje: 08-05-2004, 05:28
  5. FreeBSD
    Por rPcW0rM en el foro LINUX - MAC - OTROS
    Respuestas: 1
    Último mensaje: 30-03-2003, 05:03

Marcadores

Marcadores

Permisos de publicación

  • No puedes crear nuevos temas
  • No puedes responder temas
  • No puedes subir archivos adjuntos
  • No puedes editar tus mensajes
  •