Resultados 1 al 3 de 3

Tema: [Iphone] Liberar por testpoint

  1. #1 [Iphone] Liberar por testpoint 
    Colaborador HH
    Fecha de ingreso
    Sep 2006
    Ubicación
    Argentina
    Mensajes
    2.073
    Descargas
    16
    Uploads
    0
    les dejo el manual de como liberar el Iphone mediante testpoint
    (esta en ingles)

    descargar

    Things needed

    You will need an iPhone (Jailbreaked +SSH enabled + Installed Binkit)

    And 2 needles (to conduct the electricity) or use your imagination



    And all the needed files - Files Needed

    For jailbreaking and installing the ssh extensions see http://www.hacktheiphone.com

    Ok here goes its simple!


    Install winscp (get it here Winscp)

    Extract Putty from the rar then put is somewhere on the desktop.

    Install the hexedit from the folder Hexedit. (this was included in these files)

    Make sure the binkit is on your iPhone. (if not it’s included in the rar)

    Copy the files in the bin folder in rar to your iphone in the /bin folder

    Now its time to open your iPhone (Use anything you can think of that would not scratch it a guitar pick is good but I used a knife which made a few scratches, but if you want to I am sure you will find something that wont scratch)
    http://www.ifixit.com/Guide/iPhone/ is a great guide on how to open your iPhone!

    Now open up the metal case right below the battery.

    Now Startup your iphone (plug it into your computer)

    Connect your iPhone to your wifi network, and set up a connection from your pc to the iphone with winscp.
    If you don’t know how
    - open WINSCP
    - Select new.

    TO GET YOUR IP OF YOUR IPHONE SIMPLY LOOK AT YOUR IPHONE CLICK ON SETTINGS GOTO Wi-FI > THEN UNDER YOUR CHOSEN NETWORK Click the little Blue Arrow (>)

    This should Show your IP ADDRESS Under IP Address!

    Now! Lets get started

    - Enter the ip of your iphone into the host address field - username : root
    - password : dottie
    - File Protocol SCP
    - save the settings and login
    (ignore the errors ;-))
    - Create a new folder “etc” in the folder /usr/local/etc or /etc
    - Copy termcap from rar to this folder.
    - Copy bbupdater from rar to /bin
    - Goto the folder /system/library/launchdeamons and move the file commcenter.plist to your desktop (make sure the file is moved and
    not copied. reboot the phone. (you can use putty to do this )
    - start putty
    - enter the ipaddress of your iphone in the hostname field, and click open.
    - login with username : root and the pass : dottie
    - type reboot
    - disconnect and reconnect the phone. (it will automaticaly turn on)
    - Start putty again and login.
    - type : minicom -s
    - select serial port setup and type : A.
    - enter: /dev/tty.baseband Enter
    - press esc
    - select save setup as dfl
    - when entering minicom type AT
    - the modem should respond. OK

    This is where you will touch your two points together using your needles! Only without soldering!



    Or a clearer picture for those who are unsure !



    The two points should be touching
    There should not be any response… even wen you touch the needles again.
    - Make sure the needles are not touching now.
    - exit Minicom (CTRL A then X)
    - type : bbupdater -v
    - type minicom it should respond ok when entering the AT command.
    - when this is the case. The needles where connected right

    Now time for more things! If you got this far WELL DONE!

    Now…….. The rest NORDumper is located in the files you downloaded earlier!


    - Copy the files from folder NORDumper from the rar to /usr/bin on your iphone using winscp

    - in putty, go to this folder. type : cd /usr/bin type : ls you should see the nordumper file
    - type : NORDumper dump.bin (this is case sensitive…)
    - now you have to wait for about 10 to 20 mins. Wait till the dump is completed.

    Now for the next step! To FREEDOM! (Quote from Gladiator)
    - Copy the contents of the folder ieraser from the rar also to /usr/bin on your iphone using winscp.
    - Start Cygnus Hex Editor. and open the file ICE03.14.08_G.fls. (included in the rar) (only for firmware 1.0.1 and 1.0.2 !!!!)
    - Select the range from 000001A4-000009a4. In the taskbar the selection should show 1A4-9A4. (verry important !!)
    - then goto menu edit–> select copy to file. name the file : secpack
    - Upload this file to /usr/bin on the iphone.
    - in putty type ieraser. (if it hangs try http://lpahome.com/ieraser.rar )




    Getting closer!
    - copy the dump.bin from /usr/bin to your PC using winscp.
    - Open this file with Cygnus Hex Editor.
    - Select the range 00020000-00304000
    - In the taskbar it should show 20000-304000 (if not do the selection again)
    - goto menu edit–> select copy to file. name the file : nor
    - open this file with the hexeditor.
    - Find the row 215148 and change 04 00 A0 E1 to 00 00 A0 E3
    - save the file, and upload it to /usr/bin using winscp

    Too close!
    - copy the files in the folder iunlocker from ther rar to /usr/bin
    - Touch YOUR NEEDLES TOGETHER HERE! (Touching where they should)
    - with putty goto /usr/bin and type iunlocker
    - when the program halts. Remove your needles and press a character on your keyboard followed by Enter.
    - you will see a lot of numbers running on your screen. This also takes a while…
    - after it’s done type : bbupdater -v
    - it should show : xgendata and some more text i can’t remember..

    Last steps to total FREEDOM!
    - start minicom again.
    - type AT+CLCK=”PN”,0,”00000000″
    - type AT+CLCK=”PN”,2 this should respond in a 0 .
    - Congrats !!!! youre phone is now simlockfree.
    - now copy back the commcenter.plist file (don’t forget)

    WELL DONE!
    - Now put your phone back together and insert your chosen simcard
    - Turn on the phone
    The new simcard will not be accepted yet.

    Now activate your Iphone

    You could update the phone with itunes to 1.0.2.
    After that you could use iactivator to jailbreak and to generete the keys and activate the phone.

    fuente
    "¿Acaso vuestro terror se asemeja al del despotismo? Si, la espada que brilla en las manos de los héroes de la libertad se asemeja a la espada con la que están armados los esbirros de la tiranía."
    Citar  
     

  2. #2  
    Moderador HH
    Fecha de ingreso
    Nov 2006
    Mensajes
    1.516
    Descargas
    7
    Uploads
    0
    Buen aporte, si señor...

    Pero como falles a la hora de hacer el contacto acabas de tirar 500~600$ a la basura o 500~600€. O simplemente si el programita que instales tenga algun fallo y te jod... el iPhone, lo cual seria una cacho de putada (hablando claro)

    Un saludo
    Mess with the best, die like the rest.


    Hazle a los demas... antes de que te hagan a ti.
    Citar  
     

  3. #3  
    Colaborador HH
    Fecha de ingreso
    Sep 2006
    Ubicación
    Argentina
    Mensajes
    2.073
    Descargas
    16
    Uploads
    0
    claro, pero el que no arriesga, no gana.
    aca te tiras US$ 900 (el pirata) o US$ 1900 (el pasado por las aduanas)
    "¿Acaso vuestro terror se asemeja al del despotismo? Si, la espada que brilla en las manos de los héroes de la libertad se asemeja a la espada con la que están armados los esbirros de la tiranía."
    Citar  
     

Temas similares

  1. iphone 4 vs modem usb
    Por 54yk3r en el foro TELEFONIA
    Respuestas: 2
    Último mensaje: 22-08-2010, 18:41
  2. perdido el iphone
    Por 1fluke2 en el foro TELEFONIA
    Respuestas: 1
    Último mensaje: 01-12-2009, 00:40
  3. Respuestas: 0
    Último mensaje: 21-07-2008, 14:03
  4. IPHONE hackeado
    Por rekcahal en el foro NOTICIAS
    Respuestas: 2
    Último mensaje: 06-07-2007, 20:12
  5. cables para testpoint de celulares
    Por alemar06 en el foro TELEFONÍA MOVIL
    Respuestas: 2
    Último mensaje: 02-03-2007, 09:25

Marcadores

Marcadores

Permisos de publicación

  • No puedes crear nuevos temas
  • No puedes responder temas
  • No puedes subir archivos adjuntos
  • No puedes editar tus mensajes
  •