Resultados 1 al 4 de 4

Toskiba Keydisk

  1. #1 Toskiba Keydisk 
    Iniciado
    Fecha de ingreso
    Jun 2007
    Mensajes
    1
    Descargas
    0
    Uploads
    0
    I try to make key disk ...
    hmmm...
    wat was to be "Move to sector 1 on the disk (sector 0 is the boot sector)"

    Thank You

    dexter27

    Cita Iniciado por el pegao Ver mensaje
    Gracias Gondar_f... intentaré no forzarlo por hardware, no vaya a ser que me lo cepille...

    También he encontrado esto, pero tampoco funciona:

    Keydisk to bypass Toshiba laptop password
    The following instructions can be used to create a "keydisk" to enable you to bypass a Toshiba laptop BIOS password.

    You will need the following items:

    Blank formatted floppy diskette (720K or 1.44Mb)
    The notebook in question
    Another PC, even a desktop
    A decent hex/disk editor
    Follow these steps to create the disk:

    Fire up the hex/disk editor on your working PC
    Insert the floppy into the drive
    Edit the disk with the editor
    Move to sector 1 on the disk (sector 0 is the boot sector)
    Alter the first 5 bytes of the sector to reflect the following:
    004B
    0045
    0059
    0000
    0000
    Save the disk
    Put the disk in the laptop's floppy drive and cold-boot
    When the password prompt appears, press Enter. You should be asked if you want to set the password again.


    En este fin de semana prepararé el artilugio ese del puerto paralelo, ya os contaré.
    Citar  
     

  2. #2  
    Moderador Global
    Fecha de ingreso
    Aug 2005
    Mensajes
    6.279
    Descargas
    7
    Uploads
    0
    Cita Iniciado por dexter27 Ver mensaje
    I try to make key disk ...
    hmmm...
    wat was to be "Move to sector 1 on the disk (sector 0 is the boot sector)"
    Hi dexter27,

    do not reopen old threads, specially if you are not going to provide an effective solution to the original problem. Please take a look to our Normas del foro before continuing posting.

    Here "el pegao" was telling us that the cable didn't work for him.

    Move to sector 1 on the disk" means that it is where you have to put the first value provided with the instructions, besause sector 0 is the boot sector and is not useful for storing that data.

    I hope it helped you

    Salu2


    Keep on Rollin'

    . . . . . . . . . . . . . . . . . . . .
    [[ NORMAS DEL FORO ]]
    . . . . . . . . . . . . . . . . . . . .
    __________
    Citar  
     

  3. #3  
    Co-Admin HackHispano.com Avatar de clarinetista
    Fecha de ingreso
    Jan 2004
    Ubicación
    HackHispano/SM
    Mensajes
    7.773
    Descargas
    31
    Uploads
    8
    ok, j8, ya lo he movido.
    Welcome dexter27 and please read the Forum Rules.

    PD: ¿Deberiamos traducirlas a varios idiomas?
    Citar  
     

  4. #4  
    Avanzado
    Fecha de ingreso
    Aug 2006
    Ubicación
    ssh -l root nasa.gov
    Mensajes
    196
    Descargas
    0
    Uploads
    0
    No...

    Salu2
    Última edición por LooKoo; 30-06-2007 a las 06:55
    --== We can change the World if God gives us the source code ==--

    !!! @@@-- Read-The-Fucking-Rules --@@@ !!!
    Citar  
     

Marcadores

Marcadores