ieee80211_crypt: registered algorithm 'NULL'
[ 47.524257]
ieee80211: 802.11 data/management/control stack, git-1.1.7
[ 47.524261]
ieee80211: Copyright (C) 2004-2005 Intel Corporation <jketreno@li nux.intel.com>
[ 47.543840]
input: PC Speaker as /class/input/input1
[ 47.556810]
via-rhine.c:v1.10-LK1.2.0-2.6 June-10-2004 Written by Donald Beck er
[ 47.556882]
GSI 19 sharing vector 0xC1 and IRQ 19
[ 47.556886]
ACPI: PCI Interrupt 0000:00:12.0[A] -> GSI 23 (level, low) -> IRQ 193
[ 47.556986]
eth0: VIA Rhine II at 0x1a800, 00:15:f2:d3:ee:48, IRQ 193.
[ 47.557701]
eth0: MII PHY found at address 1, status 0x7849 advertising 01e1 Link 0000.
[ 47.562276]
mrv8k: Marvel 8xxx Wireless driver, 0.0.2
[ 47.562280]
mrv8k: Copyright(c) 2005 Luc Saillard <
[email protected]>
[ 47.562325]
mrv8k: mrv8k_init_one: enter
[ 47.562347] GSI 20 sharing vector 0xC9 and IRQ 20
[ 47.562351]
ACPI: PCI Interrupt 0000:00:0e.0[A] -> GSI 19 (level, low) -> IRQ 201
[ 47.562976]
mrv8k: bar1 (0xf9e00000) relocated at 0xffffc20000080000
[ 47.562982]
mrv8k: bar2 (0xf9d00000) relocated at 0xffffc200000a0000
[ 47.565133]
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 47.602408]
parport: PnPBIOS parport detected.
[ 47.602520]
parport0: PC-style at 0x378 (0x778), irq 7, dma 3 [PCSPP,TRISTATE ,COMPAT,EPP,ECP,DMA]
[ 47.688046] Floppy drive(s): fd0 is 1.44M
[ 47.716574] FDC 0 is a post-1991 82077
[ 47.777152]
logips2pp: Detected unknown logitech mouse model 0
[ 47.990010]
drivers/usb/class/usblp.c: usblp0: USB Bidirectional printer dev 4 if 1 alt 0 proto 2 vid 0x04B8 pid 0x0818
[ 47.990111]
usbcore: registered new driver usblp
[ 47.990115] drivers/usb/class/usblp.c: v0.13: USB Printer Device Class driver
[ 47.992910] usbcore: registered new driver usbserial
[ 47.992937]
drivers/usb/serial/usb-serial.c: USB Serial support registered fo r generic
[ 47.992961]
usbcore: registered new driver usbserial_generic
[ 47.992963] drivers/usb/serial/usb-serial.c: USB Serial Driver core
[ 47.997984] drivers/usb/serial/usb-serial.c: USB Serial support registered fo r pl2303
[ 47.998017]
pl2303 1-2:1.0: pl2303 converter detected
[ 47.998147] usb 1-2: pl2303 converter now attached to ttyUSB0
[ 47.998159]
usbcore: registered new driver pl2303
[ 47.998162]
drivers/usb/serial/pl2303.c: Prolific PL2303 USB to serial adapto r driver
[ 48.057354]
mrv8k: Firmware 'mrv8k-b.fw' not available or load failed.
[ 48.057361]
mrv8k: mrv8k_init_one: return -2
[ 48.057365]
mrv8k: Command SET_RADIO. len=12 state=off preamble=auto
[ 48.057369]
mrv8k: queue command (ffff81001a066000)
[ 48.057371]
mrv8k: kickoff command (ffff81001a066000)
[ 48.136720]
input: ImPS/2 Logitech Wheel Mouse as /class/input/input2
[ 48.163923] eth0: link down
[ 48.168093] ts: Compaq touchscreen protocol output
[ 49.085696]
ACPI: PCI interrupt for device 0000:00:0e.0 disabled
[ 49.085702]
mrv8k: mrv8k_init_one: return -2
[ 49.085707]
mrv8k: probe of 0000:00:0e.0 failed with error -2
[ 49.087589]